Pull-Out Testing Services
At Rope Task, we provide professional pull-out testing services for fixings, anchors, and façade systems across commercial, industrial, and high-rise buildings. Using CFA-qualified technicians, we carry out accurate, compliant testing at ground level and at height, utilising all access methods.
Pull-out testing is a critical safety requirement for verifying the integrity of fixings used in glazing systems, façade installations, signage, cladding, fall-arrest systems, and structural attachments. Our testing services give clients confidence that fixings meet load requirements, industry standards, and long-term safety expectations.
What Is Pull-Out Testing?
Pull-out testing is a controlled process used to determine the load-bearing capacity of anchors and fixings installed in substrates such as concrete, brick, masonry, and steel. By applying a calibrated tensile force, we assess whether a fixing can safely withstand the loads for which it was designed.
This testing is commonly required:
- Before new installations
- During façade remediation works
- As part of compliance and safety audits
- When fixings have been installed in unknown or aged substrates
- To validate the fixing suitability in real-world conditions
Pull-out testing provides measured, recorded data to help engineers, contractors, and building owners make informed decisions.
Why Pull-Out Testing Is Essential
Failing fixings pose serious safety risks, particularly on high-level structures. Pull-out testing helps prevent:
- Façade or glazing failures
- Falling objects and public safety hazards
- Structural defects
- Costly remedial works or reinstallation
- Non-compliance with regulations and warranties
For property owners and contractors, pull-out testing offers risk reduction, regulatory compliance, and long-term asset protection.
Our Pull-Out Testing Services
Anchor & Fixing Testing
We test a wide range of fixings, including:
- Mechanical anchors
- Resin anchors
- Bolts and threaded rods
- Façade fixings
- Glazing and curtain wall anchors
- Signage and bracket fixings
Testing is carried out in line with manufacturer guidelines and relevant industry standards.
High-Level Pull-Out Testing Using Rope Access
Using rope access allows our technicians to perform pull-out testing safely at height, even in areas with:
- Limited ground access
- Confined urban environments
- Complex façades
- Operational buildings
This method avoids the need for scaffolding or lifting equipment, offering a faster and more cost-effective solution.
New Installation Verification
Pull-out testing is often required before complete installation begins. We verify:
- Substrate suitability
- Fixing performance
- Load capacity under real conditions
This ensures that systems such as glazing, signage, cladding, and fall-arrest equipment are installed safely from the outset.
Existing Fixing Assessment
For older buildings or legacy installations, we test existing fixings to:
- Confirm continued structural integrity
- Identify corrosion, degradation, or poor installation.
- Support refurbishment or upgrade projects
This is particularly valuable for buildings undergoing façade works, cleaning, or retrofitting.
Reporting & Certification
After testing, we provide:
- Detailed test results
- Load values achieved
- Pass/fail confirmation.
- Photographic evidence (where required)
- Professional recommendations
These reports support compliance, warranties, and engineering approvals.
Why Choose Rope Task for Pull-Out Testing?
IRATA-Qualified Rope Access Technicians
Our technicians are trained to the highest standards in rope access, enabling safe, precise testing in challenging locations.
Minimal Disruption
No scaffolding, road closures, or prolonged site setup — ideal for live environments and occupied buildings.
Accurate & Reliable Results
We use calibrated testing equipment to deliver dependable, measurable data you can trust.
Cost-Effective Solutions
Rope access significantly reduces access costs while maintaining complete safety and compliance.
End-to-End Support
From planning and testing to reporting and advice, we support your project at every stage.
Industries & Applications
Our pull-out testing services support a wide range of sectors, including:
- Commercial office buildings
- High-rise residential developments
- Retail & shopping centres
- Industrial & warehousing facilities
- Healthcare & education buildings
- Public sector & infrastructure projects
Common applications include:
- Glazing and curtain wall systems
- Sign installation projects
- Façade remediation
- Fall-arrest and safety systems
- DOFF cleaning preparation
- Structural attachments at height
Compliance, Safety & Best Practice
Safety and compliance are central to our pull-out testing services. All works are delivered with:
- Site-specific risk assessments
- Method statements
- Rescue and contingency plans
- Equipment certification
- Experienced supervision
Our testing supports compliance with relevant UK building regulations, façade standards, and manufacturer specifications.
Integrated Rope Access Services
Pull-out testing is often delivered alongside our other specialist services, including:
- Glazing solutions
- Sign installation
- DOFF façade cleaning
- Façade inspections & surveys
- High-level maintenance
This integrated approach saves time, reduces contractor overlap, and ensures consistency across your project.
Book a Pull-Out Testing Survey
If you require reliable, professional pull-out testing at height, Rope Task offers a safe, efficient, and proven solution. Our team works closely with contractors, engineers, and property managers to deliver results that support safe installations and long-term performance.